|
STAINLESS STEEL WELDED CONSTRUCTION MEETS MIL SPECS
Series 2335 Pressure Switches provide reliable, diaphragm-actuated snap action switching in a miniature package of stainless steel with all-welded construction.
Designed to meet critical MIL-Spec environments including 2000°F FAA flame-proof requirements, these switches can be set from 2 to 450 psig with the capacity of meeting a proof pressure of 1000 psig and a burst pressure of 2500 psig.
In addition to providing dependable, repetitive service under critical MIL specification type environments such as shock, vibration and temperature cycling, Series 2335 Pressure Switches are compatible with a variety of media including JP-4 and JP-5 fuel and hydraulic and transmission fluids.
2335 Specifications
Pressure Setting Range:
|
4 to 450 psig (factory set)
|
Proof Pressure:
|
1,000 psig
|
Burst Pressure:
|
2,500 psig
|
Setting Accuracy:
|
+/- 1% of range
|
Operating Temperature:
|
-65°F to 250°F up to 350°F, if required
|
Pressure Port:
|
1/8" NPT (male) or as required
|
Switch Selection:
|
SPDT, SPDT-NC or SPST-NO
|
Electrical Rating:
(sea level) |
28 VDC, 4 amp res, 2.5 amp ind.
118 VAC, 5 amp ind. or res.
(Gold contacts available for low levels)
|
Electrical Connection:
|
MS type receptacle as required
|
Wetted Parts:
|
304SS housing and base,
17-7PH SS diaphragm
|
Available In:
|
environmental or hermetically sealed versions |
Qualified:
|
IAW MILS 9395/RTCA DO-160 requirements
|
Life:
|
100,000 cycles typical
|
Weight:
|
3 oz. maximum
|
Note: Alternate type pressure and electrical connections are available per your specific application requirements. Further data available upon request.
|
