5000 Series Differential Pressure Switch
Series 5000 Differential Pressure Switches provide reliable snap action switching in a miniature package while retaining dependability for critical applications.
Incorporating a highly flexible elastomeric diaphragm, the compact 5000 Series switches can be set from 2 inches water to 60 p.s.i.d. or higher for specified applications.
Units can be provided with either electrical connectors or electrical wire leads. Switches are available with either stainless steel or elastomeric diaphragms dependent upon pressure ranges, media or other requirements. Minimal switching hysteresis for setpoint accuracy.
5000 Specifications
Pressure Setting Range: |
2″ H2O – 60 psid |
Proof Pressure: |
up to 250 psig
|
Burst Pressure: |
1,000 psia |
Setting Accuracy: |
+/- 1% of range |
Operating Temperature: |
-25°F to 250°F |
Pressure Port: |
1/8″ NPT, MS ports or as required |
Switch Selection: |
SPDT, SPDT-NC or SPST-NO |
Electrical Rating:(Sea Level) |
28 vdc, 4 Amp. Resistive., 2.5 Amp, Inductive load |
Electrical Connection: |
MS type receptacle or electrical wire leads |
Wetted Parts: |
304 ST. ST. or 2024 Anodized Aluminum, 17-7 PH SS diaphragm or elastomeric compound (fluorosilicone)
|
Life: |
100,000 cycles typical |
Weight: |
3 oz. maximum |
